Canon solution menu for ip1008/25/2023 Note: For how to attach the Bluetooth unit to the Bluetooth Unit Connector (inside the printer), see Attaching the Bluetooth Unit to the Inside of the Printer Make sure that the whole Side Panel is correctly attached to the printer.Īttach the Bluetooth unit to the Direct Print Port of the printer in accordance with the following procedure. (2) Fit the Side Panel protrusion (B) into its corresponding hole on the printer. (1) Fit the five protrusions on the back of the Side Panel, and then slide the Side Panel as illustrated below. Note: Before attaching the Bluetooth unit, detach its cap. Align the head of the Bluetooth unit to the Bluetooth Unit Connector with the "Canon" logo (A) at the front and then insert the Bluetooth unit until the line (B) can be seen as illustrated below. ![]() Detach the Side Panel carefully not to break the Side Panel protrusion. (3) Slide out the Side Panel as illustrated below. ![]() Do not bend the Side Panel too far otherwise, the Side Panel may be broken. (2) Unlock the end of the Side Panel by moving the screwdriver that was used in Step (1) as illustrated bellow. (1) Insert a small screwdriver or something similar into the hole on the side of the printer as illustrated bellow. Remove the Side Panel from the side of the AC adapter connector (A).Press the Power button and wait until the Power lamp stops flashing.Ĭaution: Do not attach the Bluetooth unit while the printer is on. Note: For how to attach the Bluetooth unit to the Direct Print Port, see Attaching the Bluetooth Unit to the Direct Print Port of the Printer. If printing is performed temporarily through Bluetooth communication, we recommend that you attach the Bluetooth unit to the Direct Print Port of the printer.Īttaching the Bluetooth Unit to the Inside of the PrinterĪttaching the Bluetooth Unit to the Direct Print Port of the PrinterĪttach the Bluetooth unit to the inside of the printer in accordance with the following procedure. If printing is often performed through Bluetooth communication, we recommend that you attach the Bluetooth unit to the Bluetooth Unit Connector (inside the printer). You can attach the Bluetooth unit to the Bluetooth Unit Connector (inside the printer) (A) or to the Direct Print Port (B). When using Windows Vista, and when Bluetooth Devices is displayed in Hardware and Sound under Control PanelĪuthenticate the printer as a Bluetooth device on Bluetooth Devices in Hardware and Sound under Control Panel.Īttach the Bluetooth Unit (BU-30) to the Printer Register the printer as a Bluetooth device using Bluetooth Devices. In order to connect the Bluetooth unit and print via Bluetooth communication, the following steps are required.Ĭheck that the Bluetooth unit is properly attached to the printer.Ĭheck the device name of the printer using the Canon Setup Utility. In order to print via Bluetooth communication with Macintosh, the following system requirements must be satisfied.Ī Macintosh with an Apple Bluetooth module or a Macintosh attached D-LINK DBT-120 USB Bluetooth rev.B ![]() Setting up for Bluetooth printing (Macintosh)
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |